How Do You Install Landscaping Borders? (Explained)

Landscaping borders are a great way to add color and texture to your yard. They’re also the perfect way to define the boundaries of your garden or lawn, or just to add some extra interest along a walkway. 

However, not all landscaping borders are created equal; some are better at holding up over time than others. That’s why we’ve put together this handy guide on how you can install a border in your yard that will last!

How to fit lawn edging: metal and plastic edging guide

Sure, here’s the Takeaway table without dash at the beginning:

Landscaping borders can be made from a variety of materials such as stone, brick, concrete, wood, plastic, or metal.
Landscaping borders help to define different areas of a yard and keep features separate.
Choosing the right type of landscaping border depends on budget, climate, home style, and overall aesthetic.
Installing landscaping border involves marking the area, digging a trench, laying underlayment, placing the border material, and backfilling with soil.
Further reading materials such as HGTV, Wikihow, and Savvy Gardening can provide in-depth knowledge and valuable insights on landscaping borders and installation.

1. Dig a trench

The first step in installing a border is to dig a trench. The depth of your trench depends on the size of your border and how much you want to bury it. 

You should dig your trench at least 12 inches deep and as wide as your border material so that you can easily slide it into place after installation.

The second step is to lay down landscape fabric around the area where you will be installing your new landscaping border, leaving about an inch between each piece of fabric for expansion purposes (this will help prevent weeds from growing through).

If you are looking to add some extra flair to your landscaping design, consider incorporating landscaping stones into your project. With the right type of stones, you can create a beautiful and unique landscape design that will be the envy of the neighborhood.

2. Adjust if necessary

If your border is not straight, use a shovel to straighten it out. If that doesn’t work, dig up the entire border and start over.

If you have to dig up the border, make sure that you reset your new border in a straight line. Use a level or string line to make sure it’s level as well as straight!

Sure, here’s a suggested table based on the semantic of the point:

Tips for Straightening a Crooked Landscaping Border

Use a shovelIf your border is only slightly crooked, you may be able to use a shovel to straighten it out. Simply place the shovel’s blade at the edge of the border, facing the way it needs to be moved, and gently push the shovel forward to shift the border’s edge.
Start overIf your border is too crooked, it may be best to start over. Use a trenching tool or a flat spade to dig up the entire border, including any underlayment or edging. Then, re-mark the location of the border and start fresh. This may be more work, but it can lead to a cleaner, more professional-looking result.

Adjustments can be made based on specific needs or preferences.

3. Add landscape fabric

If you’re looking to add a sense of definition and privacy to your yard, installing landscaping borders is a great way to do so. Once installed, these borders will help keep your lawn looking neat and attractive.

Landscaping fabrics are permeable membranes that prevent weeds from growing through them. They are also used as erosion control devices by preventing water from washing away topsoil. You can purchase landscape fabric at most garden centers or online through retailers such as

There are two common ways to install landscaping border fabric: by hand or with a machine (either a push reel mower or rotary cutter). 

If you’re installing the border by hand, open up the fabric on one side of its packaging and then cut it into strips with scissors or sharp knife (be sure not to cut yourself!). 

Lay each strip out flat along your desired border path; overlap seams where necessary for added strength as well as aesthetic appeal! 

When you’ve finished laying out all strips in one direction, turn over each piece so that its opposite side faces upwards before laying out another row along the same path; repeat this process until all strips have been used up–you should always start with an edge closest to where they were first taken out of their package so that there isn’t any wasted material left behind after installation has been completed!

Designing your own landscaping requires a lot of thought and planning. Check out our expert tips on creating your own landscaping to learn about the important steps that go into making your dream landscaping a reality.

4. Make sure the boards are level

Now that you have your boards in place and they are level, it’s time to check them again. You can do this by using a level or a straight 2×4 laid on top of the boards. 

Make sure that the flat surface of the board is resting on top of another board and then look down each side at an angle. 

If one side looks higher than the other side, there may be an issue with them being out of level or possibly not installed correctly in the first place. 

Either way, if your border isn’t lined up perfectly straight and even, it will not look good.

If you find that one side is higher than another on your border board installation process, there are two ways you can fix this issue:

5. Attach with metal stakes

To secure the border, you’ll need some metal stakes and a hammer to attach them to the ground. 

If you have a lot of dirt or rocks around where you’re going to install your border, consider simply hammering in stakes wherever it looks like there will be enough space for them. 

Otherwise, use a measuring tape or line painter to mark out where each stake should be hammered in so that your borders are evenly spaced apart from one another (about 4 inches apart).

Once all of your stakes have been hammered into place, use pliers to bend them at an angle—just enough so that they hold up against any weather conditions and keep your landscaping borders held down tightly against the earth. 

This way if there are strong winds or torrential rains coming through while they’re still drying out after installation, they’ll still stay firmly attached without moving around too much!

Landscaping isn’t always cheap, but with a little creativity and resourcefulness, you can create a beautiful space without breaking the bank. Learn more about simple, cost-effective landscaping with our helpful guide.

6. Add rocks or stones if desired

If you like the look of rocks or stones, you can add them to your border. Measure between the boards and choose rocks that are about the same size as the boards. 

Choose rocks that are about the same color as your board, but don’t be afraid to mix different colors in a single border. 

Use smaller rocks if you want an irregular effect and larger ones if you’re looking for something more uniform. And don’t worry if your border is heavy—it doesn’t need to be anchored into anything else since it’s going on top of mulch!

Sure, here’s a suggested table based on the semantic of the point:

Adding Rocks or Stones to Your Landscaping Border

Measure the space between the boardsMeasure the space between the boards so you know how large the rocks or stones can be without interfering with the board’s placement. Choose rocks that are roughly the same size as the boards to ensure consistency.
Prepare the areaClear the area where you want to place the rocks or stones, making sure that the soil is level and compacted. If necessary, add a layer of landscape fabric to prevent weed growth.
Place the rocks or stonesBegin placing the rocks or stones along the border, ensuring that they are level and flush with the boards. Use mortar or adhesive to keep them in place if desired. Continue placing the rocks or stones until the border is complete.
Add finishing touchesIf desired, add a layer of gravel or mulch around the border to provide a neat, finished look. This will also help to prevent soil erosion and weed growth.
MaintenanceRocks or stones may shift over time, so check periodically to ensure that they are still level and secure. Add more adhesive or mortar if necessary, and replace any rocks or stones that have become damaged or dislodged.

Adjustments can be made based on specific needs or preferences.

7. Finish with mulch

It’s time to put the finishing touches on your new garden bed by adding a layer of mulch. Mulch is a layer of material that covers the soil, helping to protect it from erosion, improve its appearance and help control weeds. 

The best way to apply mulch is by using a garden rake or shovel, but if you want something easier, you can use a leaf blower to spread your choice of materials (organic or inorganic). Organic mulch is made from decaying plant matter such as leaves, straw and bark chips; this type provides nutrients for plants as it decomposes into compost over time. 

Inorganic mulches are usually black plastic sheets or colored rock chips that help suppress weeds without needing much maintenance once installed; however, these can increase water loss from soil due to evaporation so they should not be used during periods when there might be drought conditions like summertime heat waves where temperatures reach 100 degrees Fahrenheit or higher!

Now that all seven steps have been completed successfully…congratulations! You now know how easy it is to install landscaping borders around any flower beds or vegetable gardens so that they grow healthy vegetables every year without having them destroyed every winter when snow covers everything up during wintertime months (December-February).

Installing landscaping edging can be a challenging task, but with the right tools and materials, you can create a beautifully defined space. Check out our guide on installing landscaping edging to learn everything you need to know to get started.

8. Consider using cedar boards to create a border

If you want to create a border using cedar, consider using one of these methods to get started:

Use cedar boards. If you want to create a straight border and want it to be more durable than plastic or metal, cedar boards are a great choice! They’re easy to work with and can be used to create borders of any height.

Consider using an initial design. If you’re not sure how much material you’ll need for your installation project, consider making a small-scale model first so that you can see what will work best before committing large amounts of money into the process.

9. Landscaping Borders Benefits

Landscaping borders can have a number of benefits, including:

Defining the edge of your garden area. Landscaping borders can help to define the edge of your garden and make it appear more organized. This is particularly important if you have several plants in one area, which may otherwise become difficult to distinguish from each other.

Creating a sense of order and structure. Landscaping borders can also create a sense of order and structure in your garden, which will make it look tidier overall.

Controlling the flow of water and preventing erosion; preventing soil erosion; preventing unwanted animals from entering an area where they might cause damage (such as by digging or eating plants).

When it comes to creating a stable landscape design, nothing beats the strength and durability of landscaping timbers. Learn more about where to buy landscaping timbers with our helpful guide, and start creating your dream backyard today.

10. Recycled Plastic Mulch Borders

Recycled plastic mulch borders are manufactured from recycled plastic and can be used to surround flower beds or vegetable gardens. 

They come in different colors and designs, with varying textures that mimic natural mulches such as leaf mold or pine bark. 

Plastic garden borders are easy to install, durable, attractive and low maintenance. They also require no watering or fertilizing once installed.

  • To install a border using recycled plastic lumber:
  • Lay out the border pieces on top of your existing garden bed; they should be evenly spaced so each piece fits snugly against its neighbor without gaps between them
  • Use metal stakes along one edge of the border to hold down the first row while you line up subsequent rows at right angles to it
  • Continue adding rows until your project is complete

11. Flexible No Dig Edging Kit

Flexible no dig edging is an alternative to plastic or metal edging, and it’s ideal for situations where digging into tough soil is not an option. 

The flexible rubber material can be cut to size, so you can create your own custom border design. Simply bend it into place along the edge of the area you want to cover, then fill the gap with dirt or mulch.

The material comes in a variety of colors: black and white are common options but they also make green and brown versions as well. 

One benefit of this method over other types of landscaping borders is that there’s no need for digging around plants or trees you simply place them where they belong!

12. Recycled Rubber Border Edging Kit with Connectors

The 12th and final way to install landscaping borders is by using a recycled rubber border edging kit with connectors. 

This method requires you to first place the metal stakes into the ground. The recycled rubber border edging kit then twists onto these stakes, creating a sturdy base for your new walkway or garden bed edge.

Recycled Rubber Border Edging Kit with Connectors is made from recycled tires, so it’s durable, long-lasting and won’t fade or crack over time like other types of material would do in direct sunlight year after year.

13. Even Edge Steel Edger Angle Iron Landscape Edging Kit

The Even Edge Steel Edger Angle Iron Landscape Edging Kit is an easy and effective way to install borders that are straight or curved. 

It comes with everything you need to get started, including easy-to-follow instructions. This edger can be used for a variety of applications, including flower beds, garden beds, walkways and driveways.

The edger is made from galvanized steel which gives it added durability. It also has holes in each corner for attaching stakes for extra stability when needed. 

The edger measures about 2 feet wide so it will fit easily into most areas that you want to edge but it isn’t so small that it won’t make an impact on your landscape design.


We hope this guide has been helpful in explaining how to install landscaping borders. It’s a project that can be done by anyone who has basic gardening knowledge, and it will make a huge difference in the look of your yard.

Here’s the requested markdown:

Further Reading

How to Install Landscape Edging by HGTV: A comprehensive guide on how to install different types of landscape edging.

How to Install Plastic Lawn Edging by Wikihow: A step-by-step guide on installing plastic lawn edging, with helpful tips and tricks.

Landscape Borders by Savvy Gardening: A guide to different types of landscape borders and how to choose the best type for your yard.


What is landscaping border?

Landscaping border is an edge or barrier that separates different areas in a landscape design. It serves as a visual and physical barrier between plants, flower beds, lawns, and other features in the yard.

Why do I need landscaping border?

Landscaping border helps to define different areas of your yard and adds a finished look to the overall design. It also helps to keep different features separate, preventing plants from growing into the lawn or flower beds from spilling over into walkways.

What are the different types of landscaping border material?

Some common types of landscaping border material include of stone, brick, concrete, wood, plastic, and metal.

How do I choose the right type of landscaping border material?

The right type of landscaping border material depends on your budget, the climate in your area, the style of your home, and the overall aesthetic you want to achieve. For example, natural stones are great for a rustic or traditional backyard, while metal or plastic edging is great for modern and contemporary designs.

How do I install landscaping border?

The installation process for landscaping border varies depending on the material used. However, some general steps include marking the area where you want to install the border, digging a trench, laying down any necessary underlayment, placing the border material in the trenches, and backfilling with soil.