How Do You Cover Up A Drywall Repair? (Solved)

If you’ve been around the block a few times, you’re probably familiar with drywall. The humble sheetrock is used in homes and businesses to create walls that look great, are easy to work with and can be painted over if there’s ever any damage. 

Drywall repair can be done by people with different skill levels, but the process can often lead to unsightly repairs if not done correctly. Thankfully though, even those who have never repaired drywall before can follow these simple steps:

How to Patch a Drywall Hole | Ask This Old House

Sure, here’s the single column Takeaway table for the given TITLE:

Takeaways
Tips for repairing drywall
Types of drywall damage
Tools and materials needed for repairing drywall
How to fix holes in drywall
How to match texture on a repaired wall
Time estimation for repairing drywall

Hide the Damage

The first step to hiding the damage is to cover it with a piece of drywall. Use joint tape to reinforce the edges and corners of your patch, then apply a layer of drywall compound over its surface. Allow the compound to dry completely before sanding it smooth with medium-grit sandpaper.

If you need to repair drywall and want the result to look professional, you need to match the texture of the surrounding wall. Check out our guide on matching texture on wall repair to learn how to achieve a seamless repair.

Drywall Repair Tips

The first step in repairing drywall is to remove the old joint tape. You can use a putty knife or drywall knife to scrape away the joint tape and paper from your damaged area. Be careful not to take off too much of the old material at once, because if you do, it will be harder to cover up your repair later on.

Once you have removed all of your damaged material and smoothed out your new joint tape, it’s time for repairs! 

The best way to make sure that your repair job looks seamless is by using an iron with steam function (and trust us: they exist). 

With this handy tool at hand, use a utility knife with a sharp blade to cut through both sides of the mesh paper (not through either side alone). 

Then gently pull each piece apart so that they stick together without overlapping one another—this makes them easier for painting later on down the line as well!

Drywall Repair Tips

StepAction
1Use a putty knife or drywall knife to scrape the old joint tape and paper from the damaged area.
2Sand the area around the damaged area to smooth out rough edges and create a better surface for the patch.
3Apply a thin layer of joint compound over the repair with a putty knife.
4Cover the repair with new joint tape and press it firmly into the compound.
5Apply another layer of joint compound over the tape, feathering the edges out to blend with the surrounding wall.
6Sand the repair smooth and apply another layer of joint compound if needed.
7Prime the area and paint to match the surrounding wall.

Note: The above table provides step-by-step instructions on repairing drywall and is focused mainly on tips to remove old joint tape and prepare the damaged area for the patch.

Remove Damaged Drywall

When you’re ready to begin repairs, scrutinize the damaged drywall carefully. You will likely find nails as well as screws holding it in place. 

Remove all of these with a pair of pliers or other tool. Use a utility knife to cut away any sections of drywall that were attached to the damaged area and remove them from the wall using your hand or another implement such as a putty knife.

Before you make any drywall repairs, you need to ensure that your plumbing system is working correctly. Our pro guide on fixing plumbing covers everything you need to know to handle any plumbing issues that might arise.

Cut a Rectangular Piece of Drywall

Now that you have the drywall patch cut to size and ready to install, you can begin attaching it. 

First, use a utility knife or drywall saw to score around the perimeter of your piece of drywall. This will help you cut it into more manageable pieces and reduce any chance of cracking as you move it around.

Next, place one end of your 2-by-4 on top of your joist or stud and then attach it with nails or screws so that it stays in place while you work with both hands free to secure the sheet. 

Then place another 2 by 4 on top of this one at 90 degrees from its position; this will provide additional support when installing larger sheets later on (like over shower stalls).

Reinforce the Edges and Corners of the Patch with Joint Tape.

To strengthen the edges and corners of your patch, you’ll want to apply joint tape around it. Joint tape is paper-backed, adhesive-coated cloth tape that’s designed for this purpose. 

Use a utility knife to cut the joint tape into squares or rectangles big enough to cover your drywall repair. Once you’ve done so, apply the joint tape around the perimeter of your patch and onto its edges in order to reinforce them.

If you’re planning on tackling plumbing projects on your own, you need to be prepared for the certification tests. Our experience of hard plumbing test will guide you through what to expect and how to prepare for the exam.

Apply a Layer of Drywall Compound to the Surface of the Patch.

To apply the drywall compound, you will need to use a putty knife to spread it evenly over the patch. If you have any rough edges or imperfections, you can use a tapered edge taping knife to smooth them out. 

Let the drywall compound dry overnight before sanding it smooth with medium-grade sandpaper (80-grit) and then repeat steps three through five until your repair is completely covered up.

Applying Drywall Compound to a Patch

StepAction
1Apply a thin layer of drywall compound to the surface of the patch using a putty knife.
2Use a tapered edge taping knife to smooth out any rough edges or imperfections in the compound.
3Allow the compound to dry completely according to the manufacturer’s instructions.
4Sand the compound lightly with fine-grit sandpaper to create a smooth surface for painting or applying additional layers.
5Repeat the previous steps if necessary to achieve the desired result.
6Prime and paint the surface to match the surrounding area once the final layer of compound is dry.

Note: The above table provides step-by-step instructions on how to apply drywall compound to a patch and create a smooth surface for painting or applying additional layers.

Allow the Drywall Compound to Dry, Then Sand It Smooth.

After the drywall compound has dried for at least 24 hours, you can sand it smooth. If you’re using a manual sander, start with a sanding sponge and move up to a sanding block or pad depending on the texture of your wall. 

An orbital sander works well with large areas of drywall repair, while a belt sander is best suited for small repairs like holes in walls because it’s more powerful than an orbital sander and can get into tight corners better.

Building a new plumbing system or making repairs can be a daunting task. Our pro tips on building plumbing will help you plan and execute your project with confidence.

Apply Another Layer of Drywall Compound

Use a drywall knife to apply the compound. Continue applying until it is flush with the wall. Use a sanding sponge to smooth out the surface, then apply another layer of compound and repeat this step until you have a smooth finish.

Repeat the Process until Flush with the Wall

Repeat the process until you have applied enough coats to your repair for it to be flush with the wall. You can apply as many coats as you like, but remember that a thicker coat will give a smoother finish, and therefore looks better. 

The more coats you apply, however, the longer it will take for each one to dry and become ready for painting or staining over.

Properly running plumbing pipes is critical to the overall functionality of any building. Check out our tips on running plumbing pipes to ensure your project is a success.

Sand Smooth, Paint and Enjoy!

Once you’ve sanded the repair, take a look at the surface. If it’s not smooth enough for your liking, try going over it again with more sandpaper. If you have access to an electric sander, use that instead of hand-sanding. 

Electric sanders are much more effective because they can be held at a consistent angle while they spin–this means that they don’t require constant attention and force from their operator (you).

To make sure your drywall is perfectly smooth before painting, do some test-painting in one corner of the wall so that you know how many coats will be necessary to hide any imperfections or flaws in your workmanship before putting on an entire coat of paint on top of everything else!

Conclusion

Congratulations! You’ve successfully repaired your drywall. Now you can enjoy the peace of mind and security that comes with knowing your home or business will last for many years to come.

Further reading:

Here are some additional resources that you may find helpful:

How to Patch and Repair Drywall from Lowe’s Home Improvement: A comprehensive guide on repairing drywall, including fixing holes and cracks, repairing water damage, and matching textures.

How to Repair Holes in Drywall from The Family Handyman: Step-by-step instructions on repairing holes in drywall of all sizes, including tips for making the patch nearly invisible.

How to Repair a Large Hole in Drywall from The Spruce: Detailed instructions on how to repair larger holes in drywall, including needed materials and tools, step-by-step instructions, and images to guide you through the process.

FAQs:

How do I identify different types of drywall damage?

There are several types of drywall damage ranging from small nail holes to larger holes caused by accidents or disasters. The most common types are nail or screw holes, dings, dents, scrapes, and large holes. You can learn how to identify each type of damage and how to repair it in our resources section above.

What are the common tools and materials needed to repair drywall damage?

The necessary tools to complete drywall repairs can vary depending on the type of repair you’re performing, but there are some common materials you’ll need, such as compounds, knives, sandpaper, and a putty knife. You can refer to our resources section above to get detailed information on the tools and materials needed for each type of repair.

How do I fix holes in drywall?

The process for repairing holes in drywall will vary depending on the size of the hole. Small holes can be filled with spackle or joint compound using a putty knife, and larger holes require reinforcement using a patch and drywall tape. For a step-by-step guide for fixing holes of varying sizes, refer to our resources section above.

What is the best way to match the texture of the surrounding drywall after making a repair?

Matching the texture of the surrounding drywall can be challenging, but there are tools and techniques that can help. In general, you will need drywall compound, a trowel or putty knife, and a texture sprayer. Our resources section above provides a detailed guide on how to match different types of textures.

How long does it take to repair drywall?

The time it takes to repair drywall will depend on the size of the damage and the type of repair you’re performing. Small repairs like filling nail holes can be completed in a few hours, while larger repairs like fixing a hole from a doorknob can take a full day or more. It’s essential to ensure that the repair is completed thoroughly to avoid future problems.